CHIP SEPARATOR ASSEMBLY
The Chip Separators Assembly is specially designed to separate and collect lens chips and tape debris from lens generating, shaping and surfacing.
OVERVIEW
Traps lens chip and tape debris after surfacing
Traps lens chip and tape debris after surfacing and separates from fluids maximizing water and coolant recovery and reuse. Chip debris automatically discharges to debris bins or conveyors when used with a briquetter. For high volume of CR39 and HI.
Available in two sizes:
Chip Separator Assembly Dual
For use with Pump Station or Pump Station Low Profile and Microseparator® systems HC3, or HC6.
Chip Separator Assembly Triple
For use with Pump Station or Pump Station Low Profile and Microseparator® systems HC3, or HC6.
Integrated and Standard Pump Station
Low Profile transport all fluids and debris through an overhead pipeline to a single collection point eliminating the need for tanks and debris bins in the surfacing area.
| HC3/HC3 PLUS | HC6/HC6 PLUS | |
|---|---|---|
| Supported Generators | Up to 3 | Up to 6 |
| Required Pump station | 1 per generator | 1 per generator |
| Chip Compactor or Chip Separator with tank | 1 per generator (optional) | 1 per generator (optional) |
| WEIMA briquette TH600 Vario | 1 per 2 HC3/HC3 Plus | 1 per HC6/HC6 Plus |
| WEIMA briquette TH600 Vario | 1 per 2 HC6/HC6 Plus |
TECH SPECS
| Working Range: | Assembly Dual Supports 2 digital lens generators and 2 Pump Stations or 2 Pump Station Low Profile and Microseparator®. Assembly Triple Supports 3 digital lens generators and 3 Pump Stations or 3 Pump Station Low Profile and Microseparator®. |
|---|---|
| Lens material: | All standard organic materials |
| Dimensions (wxdxh): | Assembly Dual 862 x 1087 x 1404 mm / 34 x 43 x 56 inches
Assembly Triple 1159 x 1096 x 1404 mm / 46 x 44 x 56 inches |
| Weight: | Assembly Dual 172 kg / 378 lbs Assembly Triple 218 kg / 480 lbs |
All technical data subject to change without notice.
DOCUMENTS
Coolant & Debris Management System (Brochure)
PDF – 410 KB
Download here
